![]() Once it is connected directly, try to go through this procedure again.Īnother option is to try a quick zero-fill from the main menu and then to try a "C - Set Capacity" again. If the drive is on a controller card then it is possible that the set drive size command may not work. Make sure the drive is connected directly to the motherboard and not to a third-party controller card. If a message in red displays, then an error occurred. Remove the SeaTools diskette/CD, power off the computer for a few seconds, then reboot and check the capacity of the drive again in the BIOS. If you get an OK message in white in the middle of the screen, then the process was successful. Click the "R - Reset to Maximum" button.Click "C - Set Capacity" at the top of the screen.2.As soon as you restart your comp,head to the setup and change the booting order to your primary drive (cd/dvd) first 3.Simultaneosly,open the drive and place the cd in it. ![]() If this is not the current drive, click the "D - Drive" button in the upper left until you see the drive you want to test displayed in the middle of the screen. 1.Download the 'seatools for windows' image file and use Nero to open it and write it onto an empty cd. The model number of the drive currently selected is displayed here. You can see what device is selected by looking in the middle of the screen. Look at the bottom portion of the window to see what drives are listed and what device number they are. Once the bootable media has been created, boot the computer with the media in the drive. View Knowledge Base article 201431 for instructions on how to do this.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |